WELCOME TO Hongkong NKF Machinery Co.,Limited. English | Spanish

An angular contact ball bearing uses axially asymmetric races. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings better support "combined loads" (loading in both the radial and axial directions) and the contact angle of the bearing should be matched to the relative proportions of each. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. 

In high speed applications, such as turbines, jet engines, and dentistry equipment, the centrifugal forces generated by the balls changes the contact angle at the inner and outer race. Ceramics such as silicon nitride are now regularly used in such applications due to their low density (40% of steel). These materials significantly reduce centrifugal force and function well in high temperature environments. They also tend to wear in a similar way to bearing steel—rather than cracking or shattering like glass or porcelain.Most bicycles use angular-contact bearings in the headsets because the forces on these timken bearings are in both the radial and axial direction.

Angular contact ball bearings are designed for combination radial and axial loading. Single-row bearings have high thrust capacity in one direction. Some single-row bearings are specifically designed for duplex mounting in sets for maximum performance. Double-row Conrad bearings can accommodate thrust in both directions. Specific geometry of angular contact bearing raceways and shoulders creates ball contact angles that support higher axial loads.

Expanded options include special lubricants, cage materials, preloads and coatings for additional corrosion resistance.Angular contact ball nachi bearings are engineered for use in high-speed, high precision applications for:Agriculture，Chemical，General industry，Utilities.

Angular contact bearings are designed such that there is an angle between the races and the balls when the bearing is in operation. An axial load passes in a straight line through the bearing, whereas a radial load takes an oblique path that tends to want to separate the races axially. So the angle of contact on the inner race is the same as that on the outer race. Angular contact bearings are typically assembled with a thrust load or preload. The preload creates a contact angle between the inner race, the ball and the outer race. The preload can be done while manufacturing the bearing or it can be done when the bearing is inserted into an application. 

The contact angle is measured relative to a line running perpendicular to the bearing axis. Angular contact skf bearings are capable of withstanding heavy thrust loads and moderate radial loads. The larger the contact angle (typically in the range 10 to 45 degrees), the higher the axial load supported, but the lower the radial load. In high speed applications, such as turbines, jet engines, dentistry equipment, the centrifugal forces generated by the balls will change the contact angle at the inner and outer race. 

PHC C10A-2X5MTR

ZKLF 50115 2RS

PHP20H100RSB